Created with Sketch. Created with Sketch.

Cassese 969

  • Black Tip

    These rubber tips are used on the saws vertical clamps, they will often wear and can eventually cause marks on the moulding. When worn they will also not clamp as firmly so should be changed when signs of damage are present. This is for 1 x E-tip please...

    Add to Cart
  • Black Waste Support (969 Saw)

    This part is used to support the waste piece of moulding between the mitre and will effect the cut of the machine if heavily worn. They are a simple part to change and can make a real difference to the quality of work. MFG: Z12615 Compatible with 969 Saw

    Add to Cart
  • Black Tip (with Holder)

    The rubber tips can become difficult to remove from the holder; often the holder will then become damaged. If this is the case the we would advise that you replace the whole part, making it easier to replace next time. MFG: Z16029 Compatible with all...

    Add to Cart
  • White Tip (Horizontal Clamp)

    These white tips are found on the end of the horizontal clamping mechanisms. There are two per machine and they are important for effectively clamping and holding the moulding in position ready for cutting. MFG: Z2607

    Add to Cart
  • Short Belt (969 & 999)

    There are two blade drive belts used on the 969 saw, these should be replaced as a routinely maintenance of the machine as this will prevent them from fully breaking and putting the machine out of action. MFG:  Compatible with Cassese 969 & 999...

    Add to Cart