Cassese Underpinner Spares

We have a full range of spare parts available for most models of Cassese underpinners, please contact us if you cannot find the part that you are looking for and we will be happy to help. Or contact us to book a service of your pinner.

  • 10mm Clock Spring

    This part is used to hold the wedges firmly in position for ready for firing into the moulding. Over time they will lose tension and can cause the machine to jam. They should be replaced after 12-18 months. MFG: Z772 Compatible with: CS88, CS89, CS79,...

    £12.00
    Add to Cart
  • 18mm Clock Spring

    This part is used to hold the wedges firmly in position for ready for firing into the moulding. Over time they will lose tension and can cause the machine to jam. They should be replaced after 12-18 months. MFG: Z420 Compatible with all older models of...

    £14.00
    Add to Cart
  • 30mm Green Bung

    30mm Green Bung

    This bung is useful for hard woods due to its rigidity of the material and is particularly effective for use with uneven or shaped profiles due to its round shape. Note: You must ensure that you also have the correct holder for the round bungs MFG: Z1791...

    £10.00
    Add to Cart
  • 45mm Green Bung

    45mm Green Bung

    This is a long green bung that can be used for all Cassese underpinners, it is most effective for use with hard woods and has a real advantage with shallow mouldings because of its length.   Note: You must have the correct holder to take the...

    £10.00
    Add to Cart
  • 5/2 Valve 199-299

    This part is used as one of the many pneumatic control valves within the machine and can be found in the clamping and firing circuits.  MFG: Z19775 Compatible with CS199, CS299

    £25.00
    Add to Cart
  • Black Triangle (Hard)

    This pressure pad is most effective for use with hard woods as it is much firmer than the white pad and prevents the moulding from moving. This pad can damage or mark soft moulding and so would not be suitable for these soft materials. MFG: Z1814...

    £12.50
    Add to Cart
  • Cartridge Loading Cable

    This part is attached the clock spring or pull cord and allows the wedge chutes to be removed quickly and easily from the machine.  MFG: Z634 Compatible with all current Cassese machines

    £10.40
    Add to Cart
  • Cassese 810 Hammer Retaining Screw

    Cassese 810 Hammer retaining screw is the part of the firing mechanism that holds the long 810 hammer in place when driving the wedges into the moulding. These screws are sprung loaded and are easily broken if over tightened. The Cassese 810 machine has...

    £25.00
    Add to Cart
  • Cassese 810 Hammer Support

    The Cassese 810 Hammer Support is used to hold the extra long hammer for the 810 in position so that it can be drive the wedges into the moulding. The 810 is a discontinued model and there are only a few of these parts left in stock.  

    £70.00
  • Cassese 810 Long Hammer

    Cassese 810 Long Hammer, this hammer is extra long and is only compatible with the cassese 810 model, which has been discontinued for some time. Only a handful of these left in stock and once they are gone we will not get any more.  

    £35.00
    Add to Cart
  • Distribution Block

    Distribution Block

    This part is used to guide the hammer and the wedges during the firing process.  MFG: Z817 Compatible with all current Cassese cartridge machines

    £130.00
    Add to Cart