Valiani

  • Air Flow Regulator

    Air flow regulator used on the Valaini CMC machines, the main role is to reduce the speed of the head coming down in to contact with the machine and returning to the home position. These are located on the small cylinder on the head mechanism. MFG:...

    £15.00
    Add to Cart
  • Black Pad for Green Head

    Black Pad for Green Head

    The black pad is a new style option for use with the green cutting head, they last longer than the red rollers and will require less maintenance to maintain cut quality. The hard wearing pads can be fitted straight onto the green head instead of the...

    £30.00
    Add to Cart
  • Blue/Grey Head Screws (Pack of 5)

    These screws are used on the Blue & Grey cutting heads and hold the blade in position. They are often damaged over time and should be replaced before they are completely worn out. And more difficult to remove. Note: These often get damaged when...

    £10.00
    Add to Cart
  • Dial Grub Screws (Set of 3)

    Replacement grub screws for the depth adjustment dial, these screws can be easily damaged if they are undone and adjusted a lot, it is important that they can be locked up tight to prevent the dial from slipping and giving a misleading display...

    £3.00
    Add to Cart
  • Green Head Blade Screws (Pack of 10)

    These screws are used on the Green cutting head and hold the blade in position. They are often damaged over time and should be replaced before they are completely worn out. And more difficult to remove. Note: These often get damaged when a...

    £5.00
    Add to Cart
  • Mat Pro CMC Belt Roller

    This part is used to guide the X-Axis belts on a Valiani CMC machine, there are four in total on the machine, two top and two bottom.  This part should be fitted by a Valinai trained engineer as it requires complete disassembly of the carriage of...

    £22.00
    Add to Cart
  • New Style Locking Nut

    This part is used to hold the head mechanism in the upright position, these parts can become worn over a long period of time and will need replacing. If the head mechanism is allowed to move while cutting the quality will drop. You may also consider...

    £10.00
    Add to Cart
  • Rod for Locking Handle

    This part is used to lock the head mechanism in the upright position ready to cut, it is used with the locking nut. (Comes with black plastic cap) MFG: 4091300X01 Compatible with: Valiiani Mat Pro, Supreme & Ultra

    £5.65
    Add to Cart
  • Valiani Astra 120 Manual Mount cutter

    Valiani Astra 120 Manual Mount cutter

    Valiani Astra 120 Manual Mount Cutter The Astra 120 is available in cutting capabilities of 1250mm (49”) and cuts mats of varying thickness. The machine, as standard, is supplied with magnetic stops, measuring stops, easy...

    £999.00
    Add to Cart
  • X-Axis 120 CMC Belt (Mat Pro)

    Valiani Mat Pro 120 X Axis belt, it is not advised that these parts are replaced by the user as it can throw the machine out of alignment. We would advise that you speak to one of our engineers on purchase of this part to get some advice or to book us to...

    £50.00
    Add to Cart